WARM AND PASSIVE HOUSE

EXPORT OF HYDRAULIC PRODUCTS

WARM, UNIQUE, COMPOSITE. VIKKING DOORS

مستشاري الأعمال

WARM AND PASSIVE HOUSE

Walls, foundations and roof in the Izodom system

Passive houses are nothing more than houses that do not require external heat sources. The fundamentals of such construction are the right building materials, with which you create airtight thermal envelopes that provide extremely high thermal comfort.

Thanks to Isodom, this is feasible, and very quickly.

WHAT IS IZODOM?

Izodom is a passive building system with which you can build foundations, walls and a roof with excellent heat transfer properties. Moreover, you will do it quickly because you assemble all the elements of the Izodom system like building blocks.

Izodom components are large and lightweight. A basic Izodom ‘brick’ has a surface area of 0.5 m2 and weighs 1.8 – 4.8 kg (depending on the width of the element) before concreting. By filling a wall built with Izodom materials with concrete, 4.5 m2 of finished wall can be made in one hour. One cubic metre of concrete allows 8 m2 of wall to be concreted.

It is six times faster than traditional bricklaying and subsequent wall insulation.

Isodom system. Simple, warm and environmentally friendly.

SEE OUR CATALOGUES

Did you know that we have catalogues from our suppliers on the website? There you will find an up-to-date range of building materials that can be supply to you.

See our catalogues

CAN’T FIND WHAT YOU WANT TO ORDER?

Rest assured – we probably haven’t had time to upload it yet

LAYING OUT SERVICE SYSTEMS

Special grooves, which are gouged into the foam inner wall, are used to distribute the electrical wiring. This element of the work should be carried out before concreting. The entire electrical system is covered with a finishing layer.

At the same time, the manufacturer recommends that the wall finishes be made of plasterboard or gypsum plaster. The external façade, on the other hand, is recommended to be made of thin-coat render on a mesh. It is also possible to finish the façade with clinker, ceramic tiles, façade boards and any other façade material.

EXTRA SPACE IN THE HOUSE

An additional advantage of the Izodom system is the low thickness of the partitions. A wall erected using these materials will be 40-50 cm thick with a heat transfer coefficient of, for example, U = 0.15 W/m2K. Thus, with the same building volume and increased thermal comfort, the usable area of the house will be significantly higher than with a traditional building system. Warm benefit, more space.